Job Postings USA/Canada

ALL JOBS available are NOT always listed here as we first fill positions through emails to our NETWorX registered people. Please feel free to register so you may receive those job posting emails. By signing up YOU will also be eligible to refer people for your own Bonuses and Royalties from those good referrals.

Due Date: September 30, 2019

Location: Kinston, NC

Description:

Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.

40 hours/week with possible O/T
3 months contract with possible extensions

Requirements

Employee must have the skill and knowledge to perform the following general functions:

Sealer
Assembler
Sub Assembly
Assembler/Installer Structures

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

Paid weekly with no holdback of payments
Monthly royalties
Attractive pay - DOE

Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Coordinates with engineering, manufacturing, and supply teams to develop and guide the program manufacturing and tooling plan.
Ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design.
Develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations.
Performs trade and cost studies and assists in leading integrated product and process teams.
Ability to apply knowledge in one or more of the following areas; Composite non-metallic, Electrical/Electronics, Machining, Sheet metal, Systems and Structures

40 hours/week with possible O/T
6 months contract with possible extensions

Requirements

Must have SAP or MES training
AirBus A350 experience preferred
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

  • Paid weekly with no holdback of payments
  • Monthly royalties
  • Attractive pay - DOE

 
Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Responsible for a wide range of inspection functions supporting materials, sheet metal, composites, process and assembly operations.
Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments.
Experience working with Quality Management System Policies and Procedures
Cross-train in equivalent level Assembly, Composite, Metals, Process and Systems/Payload Structures Mechanic classifications

40 hours/week with possible O/T
4 months contract with possible extensions

Requirements

Overall working knowledge of production processes
Maintain certifications as required

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

  • Paid weekly with no holdback of payments

  • Monthly royalties

  • Attractive pay - DOE

Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Sets up and operates a variety of machine tools to make parts, mechanisms, tools, or machines to exacting tolerances and dimensions.
Interprets blueprints, sketches, and engineering specifications;
Uses a variety of machinist's hand tools and precision measuring instruments;
Typically requires completion of a formal apprenticeship or equivalent training and experience.

40 hours/week with possible O/T
4 months contract with possible extensions

Requirements

Must be able to both setup and operate CNC Machines.
At least 8 years in the aircraft industry as a CNC Machine Operator.
Strong job history & AFP experience will be highly considered.

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

  • Paid weekly with no holdback of payments

  • Monthly royalties

  • Attractive pay - DOE

Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Lays out, assembles, pre-fits, and bonds a variety of metal, compositor laminate fabrications, assemblies, parts, skins or equipment.
Operates autoclave, hydraulic presses and ovens to complete the bonding cycle.
May perform complicated rework or repair. May monitor and verify quality in accordance with controlled procedures
Obtain required information from prints, charts, sketches, work orders, documents, verbal and electronic information.
Perform routine minor machine maintenance as part of their daily work duties.
Support the continuous flow of product within the manufacturing process by training and assisting other employees.
Trains to become MVP qualified.

40 hours/week with possible O/T
4 months contract with possible extensions

Requirements

2-5 years of experience in composites.
Aerospace experience required
Must be able to start ASAP

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

  • Paid weekly with no holdback of payments

  • Monthly royalties

  • Attractive pay - DOE

Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Possess the skills/knowledge to perform in one or more of the following classifications: Fabrication/Assembly Inspector Machine/Tooling Inspector
Possess the skills, knowledge and education to operate Multi-Axis automated ultrasonic systems
Possess the skills, knowledge and education to perform non-destructive inspection in a repair station environment
Teach/program multi axis non-destructive test machines that perform complex motions
Ability to investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Perform process and hardware audits and surveillance
Perform all functions associated with Level B requirements

40 hours/week with possible O/T
Temp to Perm position

Requirements

NAS 410 LEVEL III and ASNT LEVEL III Certification Required.

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

All ATG contractors are:

  • Paid weekly with no holdback of payments
  • Monthly royalties
  • Attractive pay - DOE

Don't forget to sign up as a member on our website!

Due Date: September 30, 2019

Description:

Team with others to set-up, operate and inspect parts on conventional and Computerized Numerical Controlled (CNC) machines and mediums to assure the timely production and delivery of quality products to the customer.
Work from drawings, documents, process specifications, quality control requirements, and established processes or procedures.

Duties:

Produce parts or assemblies using Conventional or Computerized Numerical Controlled (CNC) mediums
Concurrently perform related functions to provide complete hardware in accordance with engineering specifications
Perform routine minor machine maintenance as part of their daily work
Support the continuous flow of product within the manufacturing process by training and assisting employees of the same or lower classification level.
Cross trains in inspection and becomes SIA qualified.

Requirements

3-5 year CNC experience
40 hours/week with possible O/T
Temp to Perm position

Rates

Competitive rates DOE
Per Diem split available

Contact ATG for more info - 1-888-832-6284 jobs@myatg.aero

 
All ATG contractors are:

  • Paid weekly with no holdback of payments
  • Monthly royalties
  • Attractive pay - DOE

 Don't forget to sign up as a member on our website!

Due Date: October 15, 2019

Structures Techs required. Dash 8 experience required, Minimum of 5 years Trade Experience an asset, AME S licensed preferred, but not required.  Rate: DOE. Term: Open Ended START: ASAP Direct employment inquiries to jobs@myatg.aeroAll ATG contractors are:

  • Paid weekly with no holdback of Payments
  • Monthly Royalties
  • Attractive Pay - DOE

Don't forget to sign up as a member to our website!

Due Date: November 01, 2019

Mech and Avionics Techs required. B737, Dash-8, and Embaer 190 experience needed Minimum of 5 years Trade Experience an asset, M2 or AME-E licensed required.  Rate: DOE. Term: June 2019 START: ASAP Direct employment inquiries to jobs@myatg.aeroAll ATG contractors are:

  • Paid weekly with no holdback of Payments
  • Monthly Royalties
  • Attractive Pay - DOE

Don't forget to sign up as a member on our website!

Due Date: October 31, 2019

Should have at least three years experience on piston engines (Beech, Cessna, Piper, Cirrus).  PT-6 experience is valuable.  A&P Licence required. Inspection authorization and/or pilot’s licence a plus.  Responsible for routine maintenance with minimal supervision. Rate: Great rates which vary with position and DOE. Term: 3 months with chance of extension START: ASAP Direct employment inquiries to jobs@myatg.aero

Pages